Re: Changing system cursor: I did it

[Mark]

"Mark" <mark@hotmail.com> wrote:
>
>I would like to set animated cursor to a Screen while printing and when
finished
>- change it back to original.
>
>Thanks in advance.

I finally did it! I used code (with minor modifications) from the following
source:
http://www.planetsourcecode.com/xq/A...s/ShowCode.htm
If you can't load this page then go to http://www.planetsourcecode.com and
search for "animated cursors".

Mark

[Tom Esh]

FWIW just be careful using code from that site. While (apparently)
~some~ effort is made to screen based on feedback, there's still
plenty of crap to be had there.

On 13 Mar 2001 12:12:18 -0800, "Mark" <mark@hotmail.com> wrote:
>I finally did it! I used code (with minor modifications) from the following
>source:
>http://www.planetsourcecode.com/xq/A...s/ShowCode.htm
>If you can't load this page then go to http://www.planetsourcecode.com and
>search for "animated cursors".


-Tom
(please post replies to the newsgroup)