Create Procedure

[YC Choo]

Hi, Group ...
I'm a new user to DB2. I tried to create a stored procedure using Stored
Procedure Builder and faces some problems below :-

I tried to create a simple procedure but a face the message like this :-

CREATE PROCEDURE EQUITY.ProcTest ( )
LANGUAGE SQL
------------------------------------------------------------------------
-- SQL Stored Procedure
------------------------------------------------------------------------
P1: BEGIN
declare a integer;
declare b integer;
set a = 2;
set b = 5;
END P1

And the following messages :-


EQUITY.PROCTEST - Create stored procedure returns -7032.

EQUITY.PROCTEST:

*** PREPCOMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.sqc
***



LINE MESSAGES FOR P5548890.sqc

------ --------------------------------------------------------------------

SQL0060W The "C" precompiler is in progress.

SQL0091W Precompilation or binding was ended with "0"

errors and "0" warnings.



*** COMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.c
***





@echo off

REM set VCV6_DRIVE=c:\Microsoft Visual Studio

REM set include=%include%;%VCV6_DRIVE%\VC98\atl\include;%VCV6_DRIVE%\VC98\mfc\include;%VCV6_DRIVE% \VC98\include

REM set lib=%lib%;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib

REM set path=%path%;%VCV6_DRIVE%\Common\Tools\WinNT;%VCV6_DRIVE%\Common\MSDev98\Bin;%VCV6_DRIVE%\C ommon\Tools;%VCV6_DRIVE%\VC98\bin;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib



@echo off

REM set VCV5_DRIVE=c:\Program Files\devstudio

REM set include=%include%;%VCV5_DRIVE%\vc\include;%VCV5_DRIVE%\vc\atl\include;%VCV5_DRIVE%\vc\mfc\ include

REM set lib=%lib%;%VCV5_DRIVE%\vc\lib;%VCV5_DRIVE%\vc\mfc\lib

REM set path=%path%;%VCV5_DRIVE%\sharedide\bin\ide;%VCV5_DRIVE%\sharedide\bin;%VCV5_DRIVE%\vc\bin





@echo on

set SQLROUTINE_FILENAME=P5548890

set db2path=F:\MAYBANK2U\SQLLIB



nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak



*** F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.def
***

LIBRARY P5548890

EXPORTS _pgsjmp@4

pgsjmp=_pgsjmp@4





F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set SQLROUTINE_FILENAME=P5548890




F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set db2path=F:\MAYBANK2U\SQLLIB




F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak




The name specified is not recognized as an

internal or external command, operable program or batch file.



----------------------------------------------------------------------------



SQL7032N SQL procedure "PROCTEST" not created. Diagnostic file is

"P5548890.log". SQLSTATE=42904


EQUITY.PROCTEST - Build failed.

EQUITY.PROCTEST - Changes rolled back.


Someone pls help...
Thank You Very Much..
Best Regrads..YC Choo

[Samuel Sutjiono]

I had the same problem. You need to install c or c++ compiler for the SP Builder
to work.

[Bill Gamboa]

The nmake.exe program can't be found.

Look at this line....

F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak

The tmp> should be tmp\.

I hope this helps you.



"YC Choo" <ycchoo@iscpg.po.my> wrote:
>
>Hi, Group ...
>I'm a new user to DB2. I tried to create a stored procedure using Stored
>Procedure Builder and faces some problems below :-
>
>I tried to create a simple procedure but a face the message like this :-
>
>CREATE PROCEDURE EQUITY.ProcTest ( )
>LANGUAGE SQL
>------------------------------------------------------------------------
>-- SQL Stored Procedure
>------------------------------------------------------------------------
>P1: BEGIN
>declare a integer;
>declare b integer;
>set a = 2;
>set b = 5;
>END P1
>
>And the following messages :-
>
>
>EQUITY.PROCTEST - Create stored procedure returns -7032.
>
>EQUITY.PROCTEST:
>
>*** PREPCOMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.sqc
>***
>
>
>
>LINE MESSAGES FOR P5548890.sqc
>
>------ --------------------------------------------------------------------
>
>SQL0060W The "C" precompiler is in progress.
>
>SQL0091W Precompilation or binding was ended with "0"
>
>errors and "0" warnings.
>
>
>
>*** COMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.c
>***
>
>
>
>
>
>@echo off
>
>REM set VCV6_DRIVE=c:\Microsoft Visual Studio
>
>REM set include=%include%;%VCV6_DRIVE%\VC98\atl\include;%VCV6_DRIVE%\VC98\mfc\include;%VCV6_DRIVE% \VC98\include
>
>REM set lib=%lib%;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
>
>REM set path=%path%;%VCV6_DRIVE%\Common\Tools\WinNT;%VCV6_DRIVE%\Common\MSDev98\Bin;%VCV6_DRIVE%\C ommon\Tools;%VCV6_DRIVE%\VC98\bin;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
>
>
>
>@echo off
>
>REM set VCV5_DRIVE=c:\Program Files\devstudio
>
>REM set include=%include%;%VCV5_DRIVE%\vc\include;%VCV5_DRIVE%\vc\atl\include;%VCV5_DRIVE%\vc\mfc\ include
>
>REM set lib=%lib%;%VCV5_DRIVE%\vc\lib;%VCV5_DRIVE%\vc\mfc\lib
>
>REM set path=%path%;%VCV5_DRIVE%\sharedide\bin\ide;%VCV5_DRIVE%\sharedide\bin;%VCV5_DRIVE%\vc\bin
>
>
>
>
>
>@echo on
>
>set SQLROUTINE_FILENAME=P5548890
>
>set db2path=F:\MAYBANK2U\SQLLIB
>
>
>
>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
>
>
>
>*** F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.def
>***
>
>LIBRARY P5548890
>
>EXPORTS _pgsjmp@4
>
>pgsjmp=_pgsjmp@4
>
>
>
>
>
>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set SQLROUTINE_FILENAME=P5548890
>
>
>
>
>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set db2path=F:\MAYBANK2U\SQLLIB
>
>
>
>
>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
>
>
>
>
>The name specified is not recognized as an
>
>internal or external command, operable program or batch file.
>
>
>
>----------------------------------------------------------------------------
>
>
>
>SQL7032N SQL procedure "PROCTEST" not created. Diagnostic file is
>
>"P5548890.log". SQLSTATE=42904
>
>
>EQUITY.PROCTEST - Build failed.
>
>EQUITY.PROCTEST - Changes rolled back.
>
>
>Someone pls help...
>Thank You Very Much..
>Best Regrads..YC Choo

[kevin knudson]

Okay, I'm having the same problem, but I didn't create the line that has the
problem. DB2 created it incorrectly, WHERE DO I FIX THIS ????


"Bill Gamboa" <bill@gamboa.com> wrote:
>
>The nmake.exe program can't be found.
>
>Look at this line....
>
>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
>
>The tmp> should be tmp\.
>
>I hope this helps you.
>
>
>
>"YC Choo" <ycchoo@iscpg.po.my> wrote:
>>
>>Hi, Group ...
>>I'm a new user to DB2. I tried to create a stored procedure using Stored
>>Procedure Builder and faces some problems below :-
>>
>>I tried to create a simple procedure but a face the message like this :-
>>
>>CREATE PROCEDURE EQUITY.ProcTest ( )
>>LANGUAGE SQL
>>------------------------------------------------------------------------
>>-- SQL Stored Procedure
>>------------------------------------------------------------------------
>>P1: BEGIN
>>declare a integer;
>>declare b integer;
>>set a = 2;
>>set b = 5;
>>END P1
>>
>>And the following messages :-
>>
>>
>>EQUITY.PROCTEST - Create stored procedure returns -7032.
>>
>>EQUITY.PROCTEST:
>>
>>*** PREPCOMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.sqc
>>***
>>
>>
>>
>>LINE MESSAGES FOR P5548890.sqc
>>
>>------ --------------------------------------------------------------------
>>
>>SQL0060W The "C" precompiler is in progress.
>>
>>SQL0091W Precompilation or binding was ended with "0"
>>
>>errors and "0" warnings.
>>
>>
>>
>>*** COMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.c
>>***
>>
>>
>>
>>
>>
>>@echo off
>>
>>REM set VCV6_DRIVE=c:\Microsoft Visual Studio
>>
>>REM set include=%include%;%VCV6_DRIVE%\VC98\atl\include;%VCV6_DRIVE%\VC98\mfc\include;%VCV6_DRIVE% \VC98\include
>>
>>REM set lib=%lib%;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
>>
>>REM set path=%path%;%VCV6_DRIVE%\Common\Tools\WinNT;%VCV6_DRIVE%\Common\MSDev98\Bin;%VCV6_DRIVE%\C ommon\Tools;%VCV6_DRIVE%\VC98\bin;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
>>
>>
>>
>>@echo off
>>
>>REM set VCV5_DRIVE=c:\Program Files\devstudio
>>
>>REM set include=%include%;%VCV5_DRIVE%\vc\include;%VCV5_DRIVE%\vc\atl\include;%VCV5_DRIVE%\vc\mfc\ include
>>
>>REM set lib=%lib%;%VCV5_DRIVE%\vc\lib;%VCV5_DRIVE%\vc\mfc\lib
>>
>>REM set path=%path%;%VCV5_DRIVE%\sharedide\bin\ide;%VCV5_DRIVE%\sharedide\bin;%VCV5_DRIVE%\vc\bin
>>
>>
>>
>>
>>
>>@echo on
>>
>>set SQLROUTINE_FILENAME=P5548890
>>
>>set db2path=F:\MAYBANK2U\SQLLIB
>>
>>
>>
>>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
>>
>>
>>
>>*** F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.def
>>***
>>
>>LIBRARY P5548890
>>
>>EXPORTS _pgsjmp@4
>>
>>pgsjmp=_pgsjmp@4
>>
>>
>>
>>
>>
>>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set SQLROUTINE_FILENAME=P5548890
>>
>>
>>
>>
>>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set db2path=F:\MAYBANK2U\SQLLIB
>>
>>
>>
>>
>>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
>>
>>
>>
>>
>>The name specified is not recognized as an
>>
>>internal or external command, operable program or batch file.
>>
>>
>>
>>----------------------------------------------------------------------------
>>
>>
>>
>>SQL7032N SQL procedure "PROCTEST" not created. Diagnostic file is
>>
>>"P5548890.log". SQLSTATE=42904
>>
>>
>>EQUITY.PROCTEST - Build failed.
>>
>>EQUITY.PROCTEST - Changes rolled back.
>>
>>
>>Someone pls help...
>>Thank You Very Much..
>>Best Regrads..YC Choo
>

[Greg Nash]

Bill Gamboa wrote:

> The nmake.exe program can't be found.

Correct

> F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
>

Look in F:\maybank2u\sqllib\function\routine for a file called sr_cpath.bat (or where-ever your sqllib.. etc path is)

You will need to edit the file to contain the correct path, include, lib variables, which you can derive from a similar batch file your compiler provides. Follow the rem'd out lines
as an example.

In theApplication Building Guide , under "Setting the SQL Procedures Environment"
you can read...

For SQL procedures support you have to install the Application Development Client and a DB2 supported C or C++ compiler on the server
[snip]
Configuring the Compiler Environment

To create SQL procedures, configure DB2 to use a supported C or C++ compiler on the server by the following steps:
[snip]

Set the DB2_SQLROUTINE_COMPILER_PATH DB2 registry variable to the executable file with the following command:
db2set DB2_SQLROUTINE_COMPILER_PATH=executable_file

where executable_file is the full path name for the C compiler environment file.

If you do not set the DB2_SQLROUTINE_COMPILER_PATH DB2 registry variable, DB2 sets it to a default file. Depending on your operating system, this file will have one of the following
paths and file names:
[snip]

Windows:
%DB2PATH%\function\routine\sr_cpath.bat
You can use this default file as long as you modify it to reflect the settings required for the server operating system and the C or C++ compiler you are using. Note: On Windows NT and
Windows 2000, you do not have to set the DB2_SQLROUTINE_COMPILER_PATH DB2 registry variable if you store the environment variables for your compiler as SYSTEM variables.

--Greg

> "YC Choo" <ycchoo@iscpg.po.my> wrote:
> >
> >Hi, Group ...
> >I'm a new user to DB2. I tried to create a stored procedure using Stored
> >Procedure Builder and faces some problems below :-
> >
> >I tried to create a simple procedure but a face the message like this :-
> >
> >CREATE PROCEDURE EQUITY.ProcTest ( )
> >LANGUAGE SQL
> >------------------------------------------------------------------------
> >-- SQL Stored Procedure
> >------------------------------------------------------------------------
> >P1: BEGIN
> >declare a integer;
> >declare b integer;
> >set a = 2;
> >set b = 5;
> >END P1
> >
> >And the following messages :-
> >
> >
> >EQUITY.PROCTEST - Create stored procedure returns -7032.
> >
> >EQUITY.PROCTEST:
> >
> >*** PREPCOMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.sqc
> >***
> >
> >
> >
> >LINE MESSAGES FOR P5548890.sqc
> >
> >------ --------------------------------------------------------------------
> >
> >SQL0060W The "C" precompiler is in progress.
> >
> >SQL0091W Precompilation or binding was ended with "0"
> >
> >errors and "0" warnings.
> >
> >
> >
> >*** COMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.c
> >***
> >
> >
> >
> >
> >
> >@echo off
> >
> >REM set VCV6_DRIVE=c:\Microsoft Visual Studio
> >
> >REM set include=%include%;%VCV6_DRIVE%\VC98\atl\include;%VCV6_DRIVE%\VC98\mfc\include;%VCV6_DRIVE% \VC98\include
> >
> >REM set lib=%lib%;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
> >
> >REM set path=%path%;%VCV6_DRIVE%\Common\Tools\WinNT;%VCV6_DRIVE%\Common\MSDev98\Bin;%VCV6_DRIVE%\C ommon\Tools;%VCV6_DRIVE%\VC98\bin;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
> >
> >
> >
> >@echo off
> >
> >REM set VCV5_DRIVE=c:\Program Files\devstudio
> >
> >REM set include=%include%;%VCV5_DRIVE%\vc\include;%VCV5_DRIVE%\vc\atl\include;%VCV5_DRIVE%\vc\mfc\ include
> >
> >REM set lib=%lib%;%VCV5_DRIVE%\vc\lib;%VCV5_DRIVE%\vc\mfc\lib
> >
> >REM set path=%path%;%VCV5_DRIVE%\sharedide\bin\ide;%VCV5_DRIVE%\sharedide\bin;%VCV5_DRIVE%\vc\bin
> >
> >
> >
> >
> >
> >@echo on
> >
> >set SQLROUTINE_FILENAME=P5548890
> >
> >set db2path=F:\MAYBANK2U\SQLLIB
> >
> >
> >
> >nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
> >
> >
> >
> >*** F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.def
> >***
> >
> >LIBRARY P5548890
> >
> >EXPORTS _pgsjmp@4
> >
> >pgsjmp=_pgsjmp@4
> >
> >
> >
> >
> >
> >F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set SQLROUTINE_FILENAME=P5548890
> >
> >
> >
> >
> >F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set db2path=F:\MAYBANK2U\SQLLIB
> >
> >
> >
> >
> >F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
> >
> >
> >
> >
> >The name specified is not recognized as an
> >
> >internal or external command, operable program or batch file.
> >
> >
> >
> >----------------------------------------------------------------------------
> >
> >
> >
> >SQL7032N SQL procedure "PROCTEST" not created. Diagnostic file is
> >
> >"P5548890.log". SQLSTATE=42904
> >
> >
> >EQUITY.PROCTEST - Build failed.
> >
> >EQUITY.PROCTEST - Changes rolled back.
> >
> >
> >Someone pls help...
> >Thank You Very Much..
> >Best Regrads..YC Choo

[kevin knudson]

Thanks Greg, I had seen that, I thought UDB was generating the statement incorrectly.
After looking at your response, and updating the file I now have created
a UDB Stored Procedure.

Thanks Much

KlK

Greg Nash <gnash@namoicotton.com.au> wrote:
>
>
>Bill Gamboa wrote:
>
>> The nmake.exe program can't be found.
>
>Correct
>
>> F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
>>
>
>Look in F:\maybank2u\sqllib\function\routine for a file called sr_cpath.bat
(or where-ever
>your sqllib.. etc path is)
>
>You will need to edit the file to contain the correct path, include, lib
variables,
>which you can derive from a similar batch file your compiler provides.
Follow the
>rem'd out lines
>as an example.
>
>In theApplication Building Guide , under "Setting the SQL Procedures Environment"
>you can read...
>
>For SQL procedures support you have to install the Application Development
Client and
>a DB2 supported C or C++ compiler on the server
>[snip]
>Configuring the Compiler Environment
>
>To create SQL procedures, configure DB2 to use a supported C or C++ compiler
on the
>server by the following steps:
>[snip]
>
>Set the DB2_SQLROUTINE_COMPILER_PATH DB2 registry variable to the executable
file with
>the following command:
> db2set DB2_SQLROUTINE_COMPILER_PATH=executable_file
>
>where executable_file is the full path name for the C compiler environment
file.
>
>If you do not set the DB2_SQLROUTINE_COMPILER_PATH DB2 registry variable,
DB2 sets it
>to a default file. Depending on your operating system, this file will have
one of the
>following
>paths and file names:
>[snip]
>
>Windows:
>%DB2PATH%\function\routine\sr_cpath.bat
>You can use this default file as long as you modify it to reflect the settings
required
>for the server operating system and the C or C++ compiler you are using.
Note: On Windows
>NT and
>Windows 2000, you do not have to set the DB2_SQLROUTINE_COMPILER_PATH DB2
registry variable
>if you store the environment variables for your compiler as SYSTEM variables.
>
>--Greg
>
>> "YC Choo" <ycchoo@iscpg.po.my> wrote:
>> >
>> >Hi, Group ...
>> >I'm a new user to DB2. I tried to create a stored procedure using Stored
>> >Procedure Builder and faces some problems below :-
>> >
>> >I tried to create a simple procedure but a face the message like this
:-
>> >
>> >CREATE PROCEDURE EQUITY.ProcTest ( )
>> >LANGUAGE SQL
>> >------------------------------------------------------------------------
>> >-- SQL Stored Procedure
>> >------------------------------------------------------------------------
>> >P1: BEGIN
>> >declare a integer;
>> >declare b integer;
>> >set a = 2;
>> >set b = 5;
>> >END P1
>> >
>> >And the following messages :-
>> >
>> >
>> >EQUITY.PROCTEST - Create stored procedure returns -7032.
>> >
>> >EQUITY.PROCTEST:
>> >
>> >*** PREPCOMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.sqc
>> >***
>> >
>> >
>> >
>> >LINE MESSAGES FOR P5548890.sqc
>> >
>> >------ --------------------------------------------------------------------
>> >
>> >SQL0060W The "C" precompiler is in progress.
>> >
>> >SQL0091W Precompilation or binding was ended with "0"
>> >
>> >errors and "0" warnings.
>> >
>> >
>> >
>> >*** COMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.c
>> >***
>> >
>> >
>> >
>> >
>> >
>> >@echo off
>> >
>> >REM set VCV6_DRIVE=c:\Microsoft Visual Studio
>> >
>> >REM set include=%include%;%VCV6_DRIVE%\VC98\atl\include;%VCV6_DRIVE%\VC98\mfc\include;%VCV6_DRIVE% \VC98\include
>> >
>> >REM set lib=%lib%;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
>> >
>> >REM set path=%path%;%VCV6_DRIVE%\Common\Tools\WinNT;%VCV6_DRIVE%\Common\MSDev98\Bin;%VCV6_DRIVE%\C ommon\Tools;%VCV6_DRIVE%\VC98\bin;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
>> >
>> >
>> >
>> >@echo off
>> >
>> >REM set VCV5_DRIVE=c:\Program Files\devstudio
>> >
>> >REM set include=%include%;%VCV5_DRIVE%\vc\include;%VCV5_DRIVE%\vc\atl\include;%VCV5_DRIVE%\vc\mfc\ include
>> >
>> >REM set lib=%lib%;%VCV5_DRIVE%\vc\lib;%VCV5_DRIVE%\vc\mfc\lib
>> >
>> >REM set path=%path%;%VCV5_DRIVE%\sharedide\bin\ide;%VCV5_DRIVE%\sharedide\bin;%VCV5_DRIVE%\vc\bin
>> >
>> >
>> >
>> >
>> >
>> >@echo on
>> >
>> >set SQLROUTINE_FILENAME=P5548890
>> >
>> >set db2path=F:\MAYBANK2U\SQLLIB
>> >
>> >
>> >
>> >nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
>> >
>> >
>> >
>> >*** F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.def
>> >***
>> >
>> >LIBRARY P5548890
>> >
>> >EXPORTS _pgsjmp@4
>> >
>> >pgsjmp=_pgsjmp@4
>> >
>> >
>> >
>> >
>> >
>> >F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set SQLROUTINE_FILENAME=P5548890
>> >
>> >
>> >
>> >
>> >F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set db2path=F:\MAYBANK2U\SQLLIB
>> >
>> >
>> >
>> >
>> >F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake /f
F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
>> >
>> >
>> >
>> >
>> >The name specified is not recognized as an
>> >
>> >internal or external command, operable program or batch file.
>> >
>> >
>> >
>> >----------------------------------------------------------------------------
>> >
>> >
>> >
>> >SQL7032N SQL procedure "PROCTEST" not created. Diagnostic file is
>> >
>> >"P5548890.log". SQLSTATE=42904
>> >
>> >
>> >EQUITY.PROCTEST - Build failed.
>> >
>> >EQUITY.PROCTEST - Changes rolled back.
>> >
>> >
>> >Someone pls help...
>> >Thank You Very Much..
>> >Best Regrads..YC Choo
>
>
><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
><html>
>Bill Gamboa wrote:
><blockquote TYPE=CITE>The nmake.exe program can't be found.</blockquote>
>Correct
><blockquote TYPE=CITE>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake
>/f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
><br> </blockquote>
>Look in F:\maybank2u\sqllib\function\routine for a file called sr_cpath.bat
>(or where-ever your sqllib.. etc path is)
><p>You will need to edit the file to contain the correct path, include,
>lib variables, which you can derive from a similar batch file your compiler
>provides. Follow the rem'd out lines as an example.
><p>In theApplication Building Guide , under "Setting the SQL Procedures
>Environment"
><br>you can read...
><p>For SQL procedures support you have to install the Application Development
>Client and a DB2 supported C or C++ compiler on the server
><br>[snip]
><br>Configuring the Compiler Environment
><p>To create SQL procedures, configure DB2 to use a supported C or C++
>compiler on the server by the following steps:
><br>[snip]
><p>Set the DB2_SQLROUTINE_COMPILER_PATH DB2 registry variable to the executable
>file with the following command:
><br> db2set DB2_SQLROUTINE_COMPILER_PATH=executable_file
><p>where executable_file is the full path name for the C compiler environment
>file.
><p>If you do not set the DB2_SQLROUTINE_COMPILER_PATH DB2 registry variable,
>DB2 sets it to a default file. Depending on your operating system, this
>file will have one of the following paths and file names:
><br>[snip]
><p>Windows:
><br>%DB2PATH%\function\routine\sr_cpath.bat
><br><b>You can use this default file as long as you modify it to reflect
>the settings required for the server operating system and the C or C++
>compiler you are using.</b> Note: On Windows NT and Windows 2000, you do
>not have to set the DB2_SQLROUTINE_COMPILER_PATH DB2 registry variable
>if you store the environment variables for your compiler as SYSTEM variables.
><p>--Greg
><blockquote TYPE=CITE>"YC Choo" <ycchoo@iscpg.po.my> wrote:
><br>>
><br>>Hi, Group ...
><br>>I'm a new user to DB2. I tried to create a stored procedure using
>Stored
><br>>Procedure Builder and faces some problems below :-
><br>>
><br>>I tried to create a simple procedure but a face the message like this
>:-
><br>>
><br>>CREATE PROCEDURE EQUITY.ProcTest ( )
><br>>LANGUAGE SQL
><br>>------------------------------------------------------------------------
><br>>-- SQL Stored Procedure
><br>>------------------------------------------------------------------------
><br>>P1: BEGIN
><br>>declare a integer;
><br>>declare b integer;
><br>>set a = 2;
><br>>set b = 5;
><br>>END P1
><br>>
><br>>And the following messages :-
><br>>
><br>>
><br>>EQUITY.PROCTEST - Create stored procedure returns -7032.
><br>>
><br>>EQUITY.PROCTEST:
><br>>
><br>>*** PREPCOMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.sqc
><br>>***
><br>>
><br>>
><br>>
><br>>LINE MESSAGES FOR P5548890.sqc
><br>>
><br>>------ --------------------------------------------------------------------
><br>>
><br>>SQL0060W The "C" precompiler is in progress.
><br>>
><br>>SQL0091W Precompilation or binding was ended with "0"
><br>>
><br>>errors and "0" warnings.
><br>>
><br>>
><br>>
><br>>*** COMPILE F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.c
><br>>***
><br>>
><br>>
><br>>
><br>>
><br>>
><br>>@echo off
><br>>
><br>>REM set VCV6_DRIVE=c:\Microsoft Visual Studio
><br>>
><br>>REM set include=%include%;%VCV6_DRIVE%\VC98\atl\include;%VCV6_DRIVE%\VC98\mfc\include;%VCV6_DRIVE% \VC98\include
><br>>
><br>>REM set lib=%lib%;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
><br>>
><br>>REM set path=%path%;%VCV6_DRIVE%\Common\Tools\WinNT;%VCV6_DRIVE%\Common\MSDev98\Bin;%VCV6_DRIVE%\C ommon\Tools;%VCV6_DRIVE%\VC98\bin;%VCV6_DRIVE%\VC98\mfc\lib;%VCV6_DRIVE%\VC98\lib
><br>>
><br>>
><br>>
><br>>@echo off
><br>>
><br>>REM set VCV5_DRIVE=c:\Program Files\devstudio
><br>>
><br>>REM set include=%include%;%VCV5_DRIVE%\vc\include;%VCV5_DRIVE%\vc\atl\include;%VCV5_DRIVE%\vc\mfc\ include
><br>>
><br>>REM set lib=%lib%;%VCV5_DRIVE%\vc\lib;%VCV5_DRIVE%\vc\mfc\lib
><br>>
><br>>REM set path=%path%;%VCV5_DRIVE%\sharedide\bin\ide;%VCV5_DRIVE%\sharedide\bin;%VCV5_DRIVE%\vc\bin
><br>>
><br>>
><br>>
><br>>
><br>>
><br>>@echo on
><br>>
><br>>set SQLROUTINE_FILENAME=P5548890
><br>>
><br>>set db2path=F:\MAYBANK2U\SQLLIB
><br>>
><br>>
><br>>
><br>>nmake /f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
><br>>
><br>>
><br>>
><br>>*** F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp\P5548890.def
><br>>***
><br>>
><br>>LIBRARY P5548890
><br>>
><br>>EXPORTS _pgsjmp@4
><br>>
><br>>pgsjmp=_pgsjmp@4
><br>>
><br>>
><br>>
><br>>
><br>>
><br>>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set SQLROUTINE_FILENAME=P5548890
><br>>
><br>>
><br>>
><br>>
><br>>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>set db2path=F:\MAYBANK2U\SQLLIB
><br>>
><br>>
><br>>
><br>>
><br>>F:\MAYBANK2U\SQLLIB\function\routine\sqlproc\DB2\EQUITY\tmp>nmake
>/f F:\MAYBANK2U\SQLLIB\function\routine\sqlproc.mak
><br>>
><br>>
><br>>
><br>>
><br>>The name specified is not recognized as an
><br>>
><br>>internal or external command, operable program or batch file.
><br>>
><br>>
><br>>
><br>>----------------------------------------------------------------------------
><br>>
><br>>
><br>>
><br>>SQL7032N SQL procedure "PROCTEST" not created. Diagnostic file is
><br>>
><br>>"P5548890.log". SQLSTATE=42904
><br>>
><br>>
><br>>EQUITY.PROCTEST - Build failed.
><br>>
><br>>EQUITY.PROCTEST - Changes rolled back.
><br>>
><br>>
><br>>Someone pls help...
><br>>Thank You Very Much..
><br>>Best Regrads..YC Choo</blockquote>
></html>
>
>