DevX Home    Today's Headlines   Articles Archive   Tip Bank   Forums   

Page 2 of 2 FirstFirst 12
Results 16 to 20 of 20

Thread: VB6 Documentation Tool

  1. #16
    Dennis Tucker Guest

    Re: VB6 Documentation Tool


    I hate to keep going around with you on this but since you are so concerned
    I have had responses. I think something else might of interest to you but
    you are not everybody in this particular newsgroup or any other newsgroup.
    I hardly feel that posting something twice to clarify my first posting does
    not constitute everyday. You might also want to consider that if something
    does not pertain to you and you don't want to offer your "expertise" in helping
    others then don't read/respond. I did not post this message trying to strike
    an arguement. I simply needed a third party tool which I felt that this particular
    newsgroup would fit my needs perfect. Sorry if I offended you in any way.
    Maybe if you have a posting that I run in to hopefuly I could be so generous
    as to return the favor.


    Have a nice day.


    "Patrick Troughton" <Patrick@Troughton.com> wrote:
    >
    >Hi Dennis,
    >
    >Ah, biting the hand that feeds, I see? Would you rather post the same message
    >day after day and wonder why nobody's bothered responding? At least I posted
    >something constructive while everyone else was ignoring you. Have a nice
    >day.
    >
    >/Pat
    >
    >"Dennis Tucker" <dennisjt@home.com> wrote:
    >>
    >>Patrick, as I stated before I am looking for a third party tool to aid

    in
    >>the implementation of VB productivity. I felt this was the appropriate

    place
    >>for this particular scenario. If I ever decide to post another question

    >or
    >>seek some professional expertise I will re-think as to where I post and/or
    >>I will consult with you and get your expert opinion on the appropriate

    newsgroup.
    >>
    >>Thank you
    >>
    >>"Patrick Troughton" <Patrick@Troughton.com> wrote:
    >>>
    >>>It sounded like you did...."If you take a look at http://news.devx.com,

    >>you'll
    >>>see that this group is labeled "Announcements/Third-Party Info." I can

    >see
    >>>how someone might conclude that this is the best place to ask for information
    >>>about third-party tools."
    >>>
    >>>/Pat
    >>>
    >>>"Phil Weber" <pweber@devx.com> wrote:
    >>>> > As I said, and Phil has concurred, you should be posting
    >>>> > in a more appropriate newsgroup where you are more
    >>>> > likely to get a better response. Try vb.general.
    >>>>
    >>>>Patrick: I concurred? If I thought Dennis' message was more appropriate
    >>>for
    >>>>vb.general, I would have moved it there. I think it's fine here.
    >>>>---
    >>>>Phil Weber
    >>>>DevX Newsgroup Admin
    >>>>
    >>>>
    >>>

    >>

    >



  2. #17
    Patrick Troughton Guest

    Re: VB6 Documentation Tool


    >I hate to keep going around with you on this but since you are so concerned
    >I have had responses.


    Not until I posted. Until then, you had *ZERO* responses. Let me repeat that
    - zero responses. Think about it - if your question had been answered, why
    would you post again??

    >I think something else might of interest to you but
    >you are not everybody in this particular newsgroup or any other newsgroup.


    I never said that, or anything close to that. Are we even talking about the
    same thread??

    >I hardly feel that posting something twice to clarify my first posting does
    >not constitute everyday.


    You posted twice in two days without a single response. I was trying to *help*
    you so didn't have to post a third, fourth, fifth.....

    >You might also want to consider that if something
    >does not pertain to you and you don't want to offer your "expertise" in

    helping
    >others then don't read/respond.


    The point of these discussions is to *help* other people, not harass them
    because you don't like their answers.

    > I did not post this message trying to strike
    >an arguement.


    So then why are you arguing?

    > Sorry if I offended you in any way.


    I doubt that.

    >Maybe if you have a posting that I run in to hopefuly I could be so generous
    >as to return the favor.


    Can't you just cut the sarcasm and let this thread die?

    /Pat


  3. #18
    Dennis Tucker Guest

    Re: VB6 Documentation Tool


    The reason why I posted is because I got a response that was exactly what
    I was not looking for and that was documentation for VB. That is the only
    reason why I reposted. Think before you leap.

    "Patrick Troughton" <Patrick@Troughton.com> wrote:
    >
    >>I hate to keep going around with you on this but since you are so concerned
    >>I have had responses.

    >
    >Not until I posted. Until then, you had *ZERO* responses. Let me repeat

    that
    >- zero responses. Think about it - if your question had been answered, why
    >would you post again??
    >
    >>I think something else might of interest to you but
    >>you are not everybody in this particular newsgroup or any other newsgroup.

    >
    >I never said that, or anything close to that. Are we even talking about

    the
    >same thread??
    >
    >>I hardly feel that posting something twice to clarify my first posting

    does
    >>not constitute everyday.

    >
    >You posted twice in two days without a single response. I was trying to

    *help*
    >you so didn't have to post a third, fourth, fifth.....
    >
    >>You might also want to consider that if something
    >>does not pertain to you and you don't want to offer your "expertise" in

    >helping
    >>others then don't read/respond.

    >
    >The point of these discussions is to *help* other people, not harass them
    >because you don't like their answers.
    >
    >> I did not post this message trying to strike
    >>an arguement.

    >
    >So then why are you arguing?
    >
    >> Sorry if I offended you in any way.

    >
    >I doubt that.
    >
    >>Maybe if you have a posting that I run in to hopefuly I could be so generous
    >>as to return the favor.

    >
    >Can't you just cut the sarcasm and let this thread die?
    >
    >/Pat
    >



  4. #19
    Todd B - Agendum Software Guest

    Re: VB6 Documentation Tool

    Dennis,

    Being a 3rd party company, I see no problem with your post either. Since
    most of us 3rd party people usually read this group, I think you asking the
    question you did was entirely appropriate.

    BTW, to answer your question, another product you can use to do what you
    need is called Document!VB from Innovasys.

    --
    Sincerely,

    Todd B - Agendum Software
    http://www.AgendumSoftware.com | Mailto:ToddB@AgendumSoftware.com
    (608) 837-6736 Voice (419) 821-9599 Fax

    NEW release! AgMapthat - Project Browser Plus! Setup your treeview
    display with favorites, encrypt your source, enable full group project
    task management and more! Visit our web site today for more information
    and screenshots on this major VB enhancement tool!


    "Dennis Tucker" <dennisjt@home.com> wrote in message
    news:3a843ab4$1@news.devx.com...
    >
    > Patrick, as I stated before I am looking for a third party tool to aid in
    > the implementation of VB productivity. I felt this was the appropriate

    place
    > for this particular scenario. If I ever decide to post another question or
    > seek some professional expertise I will re-think as to where I post and/or
    > I will consult with you and get your expert opinion on the appropriate

    newsgroup.
    >
    > Thank you
    >
    > "Patrick Troughton" <Patrick@Troughton.com> wrote:
    > >
    > >It sounded like you did...."If you take a look at http://news.devx.com,

    > you'll
    > >see that this group is labeled "Announcements/Third-Party Info." I can

    see
    > >how someone might conclude that this is the best place to ask for

    information
    > >about third-party tools."
    > >
    > >/Pat
    > >
    > >"Phil Weber" <pweber@devx.com> wrote:
    > >> > As I said, and Phil has concurred, you should be posting
    > >> > in a more appropriate newsgroup where you are more
    > >> > likely to get a better response. Try vb.general.
    > >>
    > >>Patrick: I concurred? If I thought Dennis' message was more appropriate

    > >for
    > >>vb.general, I would have moved it there. I think it's fine here.
    > >>---
    > >>Phil Weber
    > >>DevX Newsgroup Admin
    > >>
    > >>

    > >

    >




  5. #20
    Jason Guest

    Re: VB6 Documentation Tool


    Looks like to me you got some answers. Please don't be discouraged by all
    this. Devx has been a great thing for me and many other developers for many
    years. I also agree that this would be a good place to post considering
    I came here for the same reason you did!

    Just for curiosity sake is this the Patrick Troughton from Doctor Who? If
    so, big fan!

    Good luck Dennis.

    "Dennis Tucker" <dennisjt@home.com> wrote:
    >
    >I posted a message before about VB6 Documentation. What I am looking for

    is
    >a tool to take the comments from your code and turn them into some sort

    of
    >documentation.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
HTML5 Development Center
 
 
FAQ
Latest Articles
Java
.NET
XML
Database
Enterprise
Questions? Contact us.
C++
Web Development
Wireless
Latest Tips
Open Source


   Development Centers

   -- Android Development Center
   -- Cloud Development Project Center
   -- HTML5 Development Center
   -- Windows Mobile Development Center